How to Replace the Windshield Washer Reservoir in a Dodge Ram
Most of the time, it’s easy to replace a windshield washer reservoir. Most people know how to remove and reinstall this part on their own vehicle without any help from a mechanic. If you’re having issues with your Dodge Ram 1500, here are some helpful tips for replacing your windshield washer reservoir.
The “2003 dodge ram windshield washer reservoir removal” is a step-by-step guide that will help you replace the windshield washer reservoir in your 2003 Dodge Ram.
Updated November 07, 2017 by Contributor
In a Dodge Ram, how to replace the Windshield Washer Reservoir. The Dodge Ram was first released in 1981 as a full-size pickup truck. Take care of your vehicle, including the safety precautions you should take. Make sure your windshield is clean, for example, so you can see the road better. To achieve this, keep your windshield washer fluid full and inspect the reservoir for leaks. If a leak is discovered, the reservoir should be repaired or replaced.
After determining the component number for your Dodge Ram, which varies depending on the year of your vehicle, go shopping for a replacement windshield washer reservoir. Places to start your internet search may be found in the Resources section.
To work on your Dodge Ram, use a flat surface with lots of area. Turn off your truck after placing it in park, apply the emergency brake, and leave the vehicle. Reach in with your right hand and pull the hood release.
Release the auxiliary release latch beneath the hood to get access to the engine compartment. Raise the hood until the hydraulic lift engages and it completely opens.
Look for the reservoir for the windshield washers. The reservoir of the Dodge Ram is placed right below the air cleaner filter in the front left corner of the engine compartment.
Pour fluid into the reservoir to find the leak; if it’s little, you may be able to patch it; if not, replace the whole reservoir. If your Dodge Ram has air bags, disconnect the negative connection from the battery and wait 90 seconds before turning it on.
Drain the engine coolant in a pan and properly dispose of the poisonous material by sliding beneath the vehicle and releasing the radiator drain plug. To have easier access to the washer fluid reservoir, replace the plug and then remove the top radiator hose from the radiator. Disconnect the washing hose from the pump.
Remove the washer fluid level sensor and the wire harness connections from the washer pump. Remove the reservoir by lifting it upwards and away from the radiator fan shroud after removing the mounting tabs.
Taking the windshield washer pump out of the reservoir is the first step. Reinstall the pump in your Dodge Ram and connect it to the new windshield washer reservoir. Then, reattach the wire harness connections and the washer fluid sensor, and redo the mounting tabs. Replace the seals with new ones and reattach the hoses.
The radiator hose should be reattached. Remove the radiator cap, replenish it with coolant, and reinstall it.
Fill the new reservoir with windshield washer fluid and reconnect the negative battery connection to your Dodge Ram.
Tips
If there’s any liquid remaining in the tank, drain it into a catch pan before removing it. You may purchase pre-mixed windshield washer fluid (diluted window cleaner) or create your own by combining three cups of window cleaner with one gallon of distilled water.
Warnings
In the winter, use weather-appropriate fluid that contains both cleaning and ice remover to avoid frozen fluid in your windshield washer reservoir and washer lines.
The “2010 dodge ram 3500 windshield washer reservoir” is a part that can be replaced on the 2010 dodge ram 3500. This video will show you how to replace it.
Frequently Asked Questions
How do you remove and replace windshield washer reservoir?
A: To remove and replace the windshield washer reservoir, you will first need to disconnect it from its hose that is connected on the radiator. Once disconnected, pull up on it as hard as possible until theres enough space for your hands to grip onto it. Now simply insert a screwdriver into the hole in what would be called the big piston of any physical car model and pry open the top of this part using an upward movement with equal pressure on both sides like so: …Now make sure not to tear anything apart and use some sort of lubricant (like WD-40) around this area before reattaching everything back together by inserting new hoses connecting them where theyre supposed to go.
How do you remove windshield washer fluid reservoir?
A: The windshield washer fluid reservoir is probably located under your hood. You can remove it by reaching in and pulling it out, or if you have a lift kit, then just pull up on the top of the reservoir to get rid of it.
How do I fix a leaking washer fluid reservoir?
A: If your washer fluid reservoir is leaking, you can stop it by tightening the top of the washer. The screws on the top are used to tighten or loosen a small rubber gasket which fits between two metal plates that seal against each other with friction. You may have already done this yourself if your machine uses an agitator model.
Related Tags
- how to remove windshield washer fluid reservoir 2012 dodge ram
- 1997 dodge ram windshield washer reservoir removal
- 2002 dodge ram washer fluid reservoir
- 2010 dodge ram 2500 windshield washer reservoir removal
- 2013 ram 2500 windshield washer pump replacement
- What should travel trailer tire pressure be? - November 27, 2021
- Can Class C Motorhomes Tow a Car? (With 11 Examples) - November 26, 2021
- 24 practical tips for camping in a pop up camper - November 26, 2021